New Tools And Carbide Insert Configurations From Iscar To Better The Machining Procedure



Iscar is releasing Penta 34 carbide inserts with a brand new PB chipformer. The PB chipformer incorporates a single cavity using a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer utilizing a varying frontal edge.

The completely new chipformer was fashioned for machining soft materials. It is an remarkable solution for parting bearing steel and other highly ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.

The combination of the new chipformer and IC908 grade provides remarkable chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the ingenuous IC908 PVD coated grade. The brand new family expands the application range of Iscar's utmost practical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when stacked up against to a competitor's tool, is a leading solution for machining any soft and ductile material.

Iscar's Upgrades for Parting

Iscar has developed a brand new family of reinforced Tang-Grip blades for the prominent TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced architecture, can be utilized in long overhang. Only the part of the blade imperative for penetration (cutting depth) has a reduced width. The remainder is thick, which provides enhanced rigidity and stiffness. These blades are an excellent solution for parting and grooving in between the main and sub-spindle of turn/mill machines. The single-ended insert has a very rigid clamping and therefore provides a substantially valuable advantage over any other system.

Further additions to Iscar's Grip family are Do-Grip carbide inserts built from the revolutionary Sumo Tec carbide grades: IC807 IC808 and IC830. The unique Sumo Tec grades extremely lengthen insert life, due to the most advanced coating technology followed by a particular surface treatment. This also provides improved tool life due to lesser surface stress and an uniformly coated top surface. The even surface contributes to continuous uninterrupted chip flow, less produced heat and less friction. The new process increases toughness and chipping resistance and thus diminishes friction and built-up edge. This in turn increases and prolongs tool life at expanded machining conditions for all types of work piece materials. The new PVD process is composed of Iscar's AL-TEC coating technology, utilizing the unique surface treatment.

Iscar's Chip Splitting Inserts
Iscar's completely new HM90 APCR 220605-CS grooved carbide inserts put an end to chip jamming troubles in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts styled specially for aluminum milling. With 2 grooves pressed into each polished cutting face, the inserts split aluminum chips into a amendable size for easy, reliable evacuation despite the application's characteristic elevated chip volume. The 22 mm inserts, each with 2 edges, are designed to maximize metal removal over the complete range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work particularly well with Iscar's revolutionary HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and reduce chatter in long-overhang setups. The inserts feature a cavity on the bottom to make sure correct mounting in cutter chip pockets equipped with standard spring pins. For best chip control, Iscar advises using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.

Brand New End Mills By Iscar Can Expand Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Offers A Completely New Family Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Recently Made Public A Variety Of New Lines To Enlarge Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Various Advancements Have Increased Iscar's Line Of Indexable Endmills For Elevated Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Some Of Changes In Carbide Inserts Provided By Iscar Through The Last Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Push Pull Testing For Construction Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Documentation To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

The Truth On The Graduate Jobs Obtainable In Europe.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.

Try To Get Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.

Search

 

More Articles

Associated Sites